The Best Location for Above Ground Pools

It's refreshing to go for a dip on a hot summer day. That's also one of the main reasons why people set out above ground pools in their yards. This is something that kids will enjoy, and it can be a good bonding time for you and your family. It's very convenient because you can take it down during winter or whenever you don't want to use it. When choosing a good location for the pool, you have to consider a lot of factors. Here are some things that can help you out:

• A direct sun exposure will not do any good for your skin. So, when choosing the perfect spot for above ground pools, make sure that there is enough shade in the location. This will be a good place for you too cool off when the weather is too hot.

• As much as possible, the pool should be near your house, especially if your children love to swim. Make sure that you accompany them when they go into the water. If they are big enough, you can allow them to go in alone, but make sure that you watch them closely. Allowing them to swim unsupervised may cause unwanted accidents that you should avoid. At least, if the pool is near your house, you can watch them while you're in the living room.

• Above ground pool liners should be placed on a level ground. Keeping it stable will prevent water spillage. If your area is not steady, you can balance it out by adding a bit of soil underneath or removing some rocks. Make sure that everything is even before you put your pool on it.

• Cleaning a pool can be difficult, so, see to it that you don't put it under the trees. If you do, there is a big chance that the leaves will go directly to the water. Instead of enjoying your swim, you will end up wasting most of your time cleaning it. It can also block the drain and pop the above pool liners which can cause a problem later on.

• It would be an advantage to put your pool in a place where your neighbors will not see it. That way, when you're not home, they won't be tempted to cross your fence and use it. Kids who will see this, will be tempted to try it out, even without the permission of their parents. You don't want drowning accidents to happen, so it would be better to secure it as early as possible. If you don't have enough space, you can always build a barricade around it.

Having your own pool at home is an advantage, because you can use it anytime you want and you will have privacy. You can also plan a few gatherings for your friends, which will be more convenient, since you don't have to travel somewhere else. Just make sure that you install it properly, so that there won't be any problems!

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   How to Manage Above Ground Pools Properly   How to Keep Your Pool Operation Hassle-Free   Advantages Of Screened Pool Enclosures   

Pool Chemical Imbalances: What Every Pool Owner Should Look Out for

One of the trickiest aspects of pool maintenance is reaching the perfect water chemical balance. The pool is like a human body in the way that when it's unhealthy, it will let you know. Every pool owner should be on the look for these symptoms of an upset water balance.

1. Cloudy water. This is the number one thing to watch out for. Although cloudy water is a symptom for a number of water imbalance problems, it's like having a fever-you can be positive that something is going on. Cloudy water can be caused by pH or alkalinity levels being outside the suggested ranges, not enough chlorine, not adequate filtration, or a number of other problems. Take another look at your routine to try and find where the weak spot is.

2. You're adding the suggestive amounts of chlorine, but it's not being effective, even when you add more chlorine. If you're out of your suggested alkalinity or pH levels, then it reduces chlorine's effectiveness. Only a certain percent of your chlorine actually gets used, and having perfect pH and alkalinity can help it reach its highest percentage of effectiveness.

3. There's algae in the water or on the pool's walls. This is closely related to the previous symptom in the way that algae usually forms when there's a low chlorine level, which could be because of pH or alkalinity. There are other causes of algae, such as elements brought into the pool because of environmental factors like wind or even sunlight. In this case, you've got to adjust your routine to prevent or treat an algae bloom, which can be done through filtration, shocking, and algaecide.

4. There's rust, scale, or staining on your pool wall. Staining or corrosion usually occurs because of an alkalinity or pH imbalance, while the appearance of scale usually means you need to adjust your calcium hardness.

5. Your swimmers are suffering from skin, eye, or lung irritation. If you have experienced this sign of a chemical imbalance, you will want to close your pool for a while until you can adjust it to a more comfortable level. If your swimmers are experiencing painful breathing, itchy or red skin, red or watery eyes, or any other sign of irritation, then you most likely don't have enough chlorine, but it could be a pH or an alkalinity problem as well.

As you can see, many specific problems cause the same symptoms, but you can be sure of their warning signs. Spotting chemical imbalances early and treating with the necessary swimming pool supplies will make your pool much healthier in the long run.

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   How to Manage Above Ground Pools Properly   How to Keep Your Pool Operation Hassle-Free   Using Above Ground Sand Filters   Everything You Need to Know About a Vinyl Liner Pool Repair   Keeping Pets Out of Your Pool   

How Winter Can Be the Best Time to Use Your Hot Tub

Many people enjoy using their hot tub or spa during the cold winter months. There is nothing more relaxing than soaking in the hot water, enjoying the solitude. Whether you have an ornate little courtyard or a large yard with a pool, the serenity of hot water can have a calming effect, making you want to spend more time in your spa or hot tub. If you really want to connect with nature, tubs are a great option. This article will uncover certain tips to ensure smooth operation and efficiency of your hot tub all winter long.

1. Stock up all your Master Spa Legend Series filters

Make sure you have an extra set of master spa legend series filters and enough hot chemicals: spa boss spa shock and other spa boss chemicals, and other tub parts and supplies to last you through the winter. The weather can be unpredictable and you should not take the chance to purchase these items when the roads are icy or difficult to navigate.

2. Protect your Pipes from freezing

The best way to ensure your pipes will not freeze during the winter is to keep the system fully operational. Do not reduce your temperature or lower filtration settings. Do not drain the spa if not necessary. Normal operation is best for the cold months. Even if you lose power, the spa will remain warm for several days as long as the cover is kept closed until you can restore power and get your hot tub up and running again. Make sure to check your hot tub at least twice a week to make sure the spa is running normally. Also, clean your filters regularly to ensure the system does not become clogged.

3. Cover it with a spa cover

Adding a cover to your spa will ensure that the heat stays in the spa and that the dirt stays out. It can also help protect your system, keep debris from entering the spa, reduce water evaporation and chemical depletion from sunlight - saving you on your heating, water and maintenance costs. The spa covers also come with locks on two sides; this will keep unwanted guests out of your spa. Be sure to remove snow as it accumulates on the cover.

4. Turning off Air Jets

Turn the air jets off when you're not in the tub. Running the air jets in the winter injects cold air into the spa water, causing the hot tub to use more energy to maintain the water temperature. If you do use your jets, make sure you turn them off after every use.

If you take the proper precautions, you can enjoy your tub all winter long.

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   Three Swimming Pool Concerns and the Swimming Pool Supplies Needed To Resolve Them   Swimming Pool Safety Covers   What to Consider When Building Above Ground Swimming Pool Decks   Choosing a Spa Hot Tub   

The Wonder of Infrared Saunas

Among the prime concerns of many individuals is their health and physiological well being. As a result, there is the prevailing culture of using various treatment methods to either maintain or restore one's health. This is so important to society that gave rise to alternative methods of enhancing one's wellness. Some are relatively new. Some are products of centuries of medical research, and others are improvements on established treatments. They have all become more popular with the rising trend of health consciousness in society. Among this popular and one of the most wonderful methods involves the use of infrared saunas.

Saunas have been in use since the ancient times. It is basically a system wherein individuals are exposed to heat from escaping steam. This exposure is noted to have a multitude of positive effects. The usual problem is the source and generation of the heat. This is important since the effects can only come from stable and consistent exposure. Thus, people turned to technology to improve on this reliable and greatly popular health practice. This led to the creation of the infrared sauna. This is much like the older and more traditional version with certain changes in terms of the source of the heat as well as the effects it has on users.

Infrared saunas have shown that it is not only more stable and controllable than traditional saunas, but it also yields more benefits. It is a good treatment for arthritis, fatigue and stress. The exposure the amount of consistent heat from this kind of sauna is also known to encourage sweating. This is beneficial because it helps in the cleansing of toxins. Aside from that it helps those who do not sweat a lot sweat. These are some of the clear benefits from infrared sauna use. Some of them are also found in traditional saunas but with lesser consistency.

For those who are seeking to lose weight infrared saunas are also good methods. In is said that using it regularly assists in weight loss. This is a better approach as compared to the riskier means like the use of radical drugs and methods. The infrared sauna is simply an advanced way of exposing one self to heat. This is a good natural way to lose weight since it is merely an amplification of what can be experienced in nature. This makes it safe and there have been no reports of ill effects from infrared sauna use. This contrasts with the claim of many weight loss systems or substance that is of questionable implications.

This establishes clearly that infrared saunas are modern wonders. It improves on a tried and tested health enhancement approach using modern advances. It is proven to work and has no known ill effects. It is safer than other alternative forms of treatment or health promotion approach. This is the reason for its current growing popularity. Doctor's and other health practitioners are even supporting its use. There is no doubt that an infrared sauna is a modern wonder.

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   Swimming Pool Safety Covers   Advantages Of Screened Pool Enclosures   Choosing a Spa Hot Tub   

How to Treat and Prevent Poor Pool Water Circulation

Healthy water circulation is essential for swimming pools. It makes sure that chemicals reach every part of the pool and prevents algae growth. When swimming pools aren't circulating effectively, you run the risk of experiencing "dead areas" where contaminants can accumulate or algae can grow. Dead spots aren't being sanitized efficiently, and not only ruin the look of your pool but can pose a risk to swimmers because of the possibility for contaminants to grow there.

You commonly find dead spots in the deeper areas of the pool, in the middle of the pool, around bodies in the pool like ladders, towards the edges of pools, especially corners, close to the skimmer, and in parts of the water that don't see much sunlight, such as if a tree is planted close to the edge of the pool, creating a shadow. If a dead spot hasn't already attracted more visible debris, cloudy water may be a sign that water's not circulating in that area. If your water is cloudy in one area but clear in others, then you've most likely got a dead spot on your hands.

Make sure your filtration system is working efficiently. Man pool owners make the mistake of aiming their jets towards the surface of the pool because that's what looks the most efficient-you can see it working. This is what sometimes turns the deeper water into a dead area. Make sure your returns are aimed evenly around the pool and aren't favoring any one area. If you have a dead area in the middle, you know what area your jets are neglecting. Also, if some of your filtration equipment isn't working correctly, your system might not have the ability to circulate effectively. If you're experiencing dead spots, then you should take a look at your system and try to find any weak links and then check out a swimming pool supplies store for replacements.

If you're prone to dead areas, try considering a automatic pool cleaner that is built to improve circulation. Many pool cleaners use a jet propulsion technology that circulates water as it moves. If your pool is just prone to dead areas, pool cleaners can help pick up the slack.

Pools that aren't used very often are more prone to dead areas than frequently used ones, and the explanation is simple: when people swim, they circulate water! Regular pool use improves water circulation dramatically, and it's a great excuse to take a break from a busy summer schedule.

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   Swimming Pool Safety Covers   Three Swimming Pool Concerns and the Swimming Pool Supplies Needed To Resolve Them   What to Consider When Building Above Ground Swimming Pool Decks   Choosing a Spa Hot Tub   Keeping Pets Out of Your Pool   

Wonderful Features Associated With Aquabot Turbo T2 Pool Cleaner

Good and wonderful features are now present in the Aquabot Turbo T2 pool cleaner which is designed to give you the very best result when it comes to cleaning your pool. The cleaning process is done efficiently to all surfaces regardless of their shape and sizes or the texture that may be involved. It is more advantageous in that it requires less maintenance and can serve you for long without incurring maintenance costs.

It is made of high-quality plastics, which are very strong and this helps to improve the durability of the cleaning equipment. The design of the brush is of high quality and is modified to adapt to various textures and surfaces without any damage. It is firm enough in that no blisters are left after the cleaning process is done. They can last long, and this helps to save on expenses involved in buying new cleaning brushes.

Cleaning your swimming pool will not take you long because the brushes work at very high speeds and efficiency of the machines is great. It uses a cleaning technology called washing jets and this helps to remove all the bacteria and dirt, which might be hidden deep within the pool. The jets release water at very high speeds, and this creates pressure, which pushes out the deeply lodged dirt. The use of this cleaning equipment is easy, and your will always feel comfortable when using it. The use of highly sensitive buttons helps to control the machine, and this is the backbone of this device. The operation of the Aquabot Turbo T2 pool cleaner is automated and eliminates a lot of manual operations, which might be tiresome. The washing jets are powerful, and this is enabled by using the special tubing, which tries to alter the flow of water through them thus increasing pressure.

Water passing through the tubing is subjected to a narrow passage which tries to hinder the flow. This produces a high pressure jet that facilitates the cleaning process. The nozzles near the brushes are narrow, and this helps to create a sprinkler system which is responsible for cleaning. The operational system of this equipment is similar to what a robot can do. Because of the advanced technology used, you can have the cleaning done as many times as you want without complains of tiredness or break ups of the machine.

The manufacturers have put in place well-outlined procedures in form of a manual which will greatly help you to run the equipment without any difficulties, and this is meant to make it easy for the beginners. It is good to take care not to store the equipment while wet to avoid rusting and tearing. Oiling of metallic parts before long storage is advisable. There is a cover that is water-resistant that is usually placed over the device after work and during storage. This helps to keep off dust and moisture, which may end up blocking the nozzles hence affecting the quality of brushes.

Select Your Swimming Pool Cautiously To Ensure Easy Maintenance   Swimming Pool Safety Covers   Using Above Ground Sand Filters   Everything You Need to Know About a Vinyl Liner Pool Repair   Advantages Of Screened Pool Enclosures